Wireless Broadband Equipment/Product
Trango Access5830 Access Point - 5.8 GHz 10 Mbps Broadband Wireless Base Station
Point-to-MultiPoint

Access5830™ Wireless Access Point

5.8 GHz Broadband Wireless Base Station

  • Up to 18-mile range, 12 dB fade margin
  • 10 Mbps usable subscriber throughput
  • Supports up to 500 subscribers per AP
  • Dual polarity antenna, software switchable
  • Integrated antenna and connectorized versions available

Buy Online Now

Direct from Trango
Buy Online NowAccess5830 Access Point
Buy Online NowAccess5830 Access Point EXT

Buy outside the U.S. »


Documents


Applications

The Access5830™ Wireless Access Point is ideal in the following scenarios:


Subscriber Units

The Access5830™ AP works with the following SUs:

Also see the Access5830™ System Quick Specs.


SMARTPolling™

SMARTPolling™ (U.S. patent 7,127,255) is a unique and powerful prioritization scheme designed to ensure the highest quality of service, such as VoIP, to each user at the maximum assigned throughput. The AP will poll each SU in a round-robin fashion, favoring subscribers which are busy passing traffic. For this reason the SMARTPolling™ protocol is adaptive and dynamic as opposed to straight Time Division Duplex (TDD). Added control of the polling sequence is provided by the ability for network operators to specify certain subscribers as PRIORITY in which case these subscribers will be polled more frequently thus guaranteeing even lower latency for critical clients.


What's Included

  • M5830S-AP-60 OR the
    M5830S-AP-EXT radio
  • Standard Power Supply
  • Power-over-Ethernet (PoE) Junction box
  • Mounting brackets for wall/pole and dish
  • Serial programming cable

The Access5830 is an enterprise-class wireless access point offering 10 Mbps, direct sequence, and spread spectrum. It operates in the 5.8 GHz unlicensed band in multiple channels. This fully weatherized outdoor unit utilizes Trango's SMARTPolling™ technology to efficiently deliver bandwidth to up to 500 subscriber units and includes a comprehensive set of management and deployment tools.

The Access5830™ wireless access point (AP)is available in two versions, one with an integrated antenna and one with dual external antenna connectors. Like all Trango Broadband products, the Access Point is powered via Power-over-Ethernet (PoE) for ease of installation.

Versatility & Scalability

The Access5830 base station works in conjunction with any Access5830™ compatible subscriber unit including the new Atlas FOX SU (see more compatible SUs at right).

Tight channels, coupled with dual polarity antennas allow total collocation potential of up to 12 access points for a fully loaded cell site. More typical deployments involve anywhere from 1 to 6 access points. With a 60 degree antenna beamwidth, you can cover a full 360 degree site with 6 APs.

Features such as 6 channels, all user-selectable, non-overlapping and programmable, coupled with dual polarity antennas allow for maximum flexibility and permit the administrator to change channel assignments quickly and to minimize susceptibility to interference.

All programming of the network and of authorized subscriber units is consolidated at the AP to maintain full network control. Supported protocols such as Telnet, SNMP, HTTP, and FTP allow network operators to configure and manage the AP database remotely to modify channel plans, configuration, the Subscriber Unit database, and other parameters.

Management and Deployment Tools

The Trango wireless access point offers a host of management tools designed to allow network operators to quickly and efficiently deploy and manage their Access5830™ network. A few features:

  • Site Survey - this tool scans entire band and reports back average and peak interference
  • RF LINK / Speed test - tests each SU for quality of link and reports overall bandwidth as well as dropped packet errors.
  • Receive Threshold Control - Setting to increase or decrease receiver sensitivity depending on range and interference conditions.
  • Channel Planning - Use the Access5830™ default channels or assign any frequency to one of 30 available channels in single MHz increments
  • Power Leveling - The powerful feature will automatically adjust the output power of each subscriber unit to the specified RSSI Target. This feature allows each SU's signal to be received at the AP at approximately the same level regardless of the AP's distance.
  • SNMP - monitor the status of all SU's via Simple Network Management Protocol (SNMP), built in web browser interface, Telnet. Collects and reports all vital SU statistics and status.

Specifications

Part Numbers M5830S-AP-60, M5830S-AP-EXT
Maximum Data Rate 10 Mbps
Frequency of Operation 5725 MHz to 5850 MHz (High Band)
Integrated AP Antenna Gain 14 dBi
EIRP (Max) 36 dBm (High Band)
Integrated Antenna Beamwidth 60° Azimuth / 10° Elevation
Integrated Antenna Type Multi-Element Patch Array
RF Connector Type (M5830S-AP-EXT) SMA RP (2)
Polarization Horizontal / Vertical (Software Switchable)
Modulation Format Direct Sequence Spread Spectrum (DSSS) with RAKE
Access Method TDD with SMARTPolling
Physical Interfaces 10/100 Ethernet Autosensing, Serial Port (RJ11)
Power Method Power-over-Ethernet
Voltage Limits 10.5 V - 24 V DC
Temp Range -40° to 60° C (-40° to 140° F)
Trango Broadband Wireless | How to Buy | Web Store | Contact
© 2003 - Trango Systems, Inc.
© Trango Systems, Inc.
Tel. +1 (858) 391-0010 | Fax: +1 (858) 391-0020 | www.trangobroadband.com
14118 Stowe Drive, Suite B, Poway, San Diego, CA 92064
Home - Trango Broadband Wireless Home - Trango Broadband Wireless Contact Trango Frequently Asked Questions How to Buy Trango Equipment