Technical Support Request
| Firmware Downloads: Point-to-Point Unlicensed | ||
| Product | Revision | Notes |
| TrangoLINK-45 P5055M |
v2.0r3 | Resolved Issues: - Fixed: Failed to set power 19 or more in Ch16 - Fixed: Failed to upgrade IC to 2p0r2 |
| v2.0r2 | Resolved Issues: - Improvement to VLAN for management access - Reset power settings after reboot - Incorrect result display between Avg dBm and Peak dBm after site survey through HTTP - Allow administrator to disable auto rate shifting Enhancements: - Allow administrator to ignore DFS signal (OE version only) rdrignore [on|off] - default is off - "[Elapse]" for DFS's cac in "sysinfo" - "autoscanmu" for RU |
|
| v2.0v1 | New Features: - VLAN aware - Class of Service (COS) capable |
|
| v2.0r1 | Original Release | |
Trango Support Documents and Downloads
Click on the links below to download Trango support documents in PDF format. Click here for legacy products.
Trango Systems Datasheets |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Datasheets: Point-to-Point
Wireless Systems |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Datasheets: |
Datasheets:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Datasheets: International-only Products |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Datasheets: Analog Video Systems Falcon PLUS (VTX5900/VRX5950) 5.8 GHz Video/Audio/Data Eagle PLUS (VTX2500/VRX2550) 2.4 GHz Video/Audio/Data SDR900H 900 MHz Digital Spread-Spectrum Solution for Pan-Tilt-Zoom] |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Datasheets: Analog Wireless Video Antennas
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Click on the links below for Trango downloads in ZIP format. |
Firmware Downloads - Unlicensed Products |
|
Programming Software for Analog Equipment
|
SDRLink SDR900H PC Interface Software For use with SDR900H Designed for use with Windows95 and higher, the SDRLink PC interface program is both straightforward and easy to use, providing a control panel to the user by which the channels, modes, and settings of the SDR900H can be set, as well as the ability to restore settings to default. The SDR900H must be connected to a PC Com port in order for the software to be used. (The CBLDAT-1 cable is required to operate the SDRLink software with the SDR900H.) Download SDRLink Software (ZIP containing EXE) 75 KB Designed for use with Windows95 and higher, the TrangoLINK™ PC interface program is both straightforward and easy to use, providing a control panel to the user by which the channels, modes, and settings of the transmitter and receiver can be set. (The CBLDAT-1 cable is required to operate TrangoLINK software with our Eagle and Falcon units, and the CBLDAT-2 cable is required to operate the software with our PTZ-900-N units.) Download TrangoLINK Software (ZIP containing EXE) 750 KB |