| Firmware Downloads: Point-to-Point Unlicensed | ||
| Product | Revision | Notes |
| Atlas 5010 P5010M |
v3.0r1 | New Features: - Added CLI command to change http port - Added CLI command to change telnet port - Changed 5.3 GHz functionality per FCC regulations |
| v1.2r7 | Resolved Issues: - Fixed SNMP crash issue. - Fixed linktest failure due to change of utype - Fixed a memory leak issue in bridge and datastore. - Fixed a synchronization issue in datastore download New Features: - Added crash information to elog - Added SNMP agent support for new MIB objects - Improved ARQ |
|
| v1.01r1 | Adds EXT uniimaxpower functionality. Corrects Ethernet disconnect problem. Note: this is a functionally identical firmware version as patch release v1.01a9 - only the version number is different. | |
| v1.0 | Initial Release. | |
| TrangoLINK-10 MU & RU |
v3.1r1 | Enhancement: Increased upper limit of heater's range |
| v3.0r1 | - Support latest hardware revision - Changed 5.3 GHz functionality per FCC regulations |
|
| v1.11 | Support latest hardware revision | |
| v1.1 | Provides enhanced manageability of radios from remote side of link. NOTE: Will not function on Rev. B or newer radios. |
|
| v1.03 | Cures Intermittent Ethernet Disconnect Problem. NOTE: Will not function on Rev. B or newer radios. |
|
| Firmware Downloads: Point-to-MultiPoint | ||
| Product | Revision | Notes |
| Access5830 AP & SU |
v3.1r1 | Enhancement: Increased upper limit of heater's range |
| v3.0r1 | - Changed 5.3 GHz functionality per FCC regulations | |
| v2.0r7 | F: AP/SU: Added two new CLI commands to manage the time which telnet or http session opens S: AP/SU: Modified arq engine to handle duplicate and out-of-sequence re-transmit packets. S: AP/SU: Fixed bug in 'pipe reset' cli command. S: SU: Added code to handle su changes uid remote command sent from AP. |
|
| v1.13 | Ability to disable local packet filtering. Support latest hardware revision. | |
| v1.12 | Provides new command to disable ARP broadcasts. Fixes PPPoE Filter. NOTE: Will not function on Rev. B or newer radios. |
|
| Access5830 AP ONLY |
v2.0r2 | Fixed adding subscriber with su2su group setting in SNMP agent Added compatibility with M5580M-FSU unit |
| v1.14 | Resolves Ethernet duplexing mismatch for devices running at 10HD. | |
| Access5830 SU ONLY |
v1.14 | Resolves Ethernet duplexing mismatch for devices running at 10HD. |
| Atlas FOX M5580M-FSU |
v2.0r13 | Resolved Issues: - Fix bugs in changing scan table during auto-scan mode or during frequency change - RSSI LEDs lighted up in opmode off mode - CLI command showed the incorrect AP to SU Error percentage - System uptime displaying incorrect time - CLI testrflink command showed the incorrect received packet count Enhanced: - ARQ engine to handle duplicate and out-of-sequence re-transmit packets - RSSI values when running rssi in CLI - Association time with access point |
| Atlas FOX M5580M | v2.0r12 | Resolved Issues: - Intermittent reboots - Maclist entries - Block ICMP when SW 2 is off Enhanced: - Rx packets |
| Fox Series SU M5800S-FSU M5800S-FSU-D M5800S-FSU-D2 M5300S-FSU |
v2.0r2 | Resolved Issues: - Not activating opmode after reboot - Incorrect RSSI values on D2 only New Features: - Support ARQ - D2 only command to adjust power output effecting RSSI values |
| Fox Series SU M5800S-FSU M5800S-FSU-D M5300S-FSU |
v05070502 FPGA | S: AP drops frames/packets from short range SU-Foxes |
| v1.07 | Allows PPPoE sessions with switch 0 (filter broadcast pkts) set. | |
| v1.06 Main Image Firmware |
Corrects Reboot functionality via HTTP interface and CLI. Ability to disable local packet filtering. | |
| v1.05 Main Image Firmware |
Provides new firmware loader program which corrects bootup problem reported in some units. | |
| v1.01 Main Image Firmware |
Cures interrupt handler error which results in intermittent loss of association. | |
| M2400S AP & SU |
v06022101 FPGA | S: AP/SU: Fixed switching horizontal/vertical polarization. |
| V1.3r2 | Implemented new CLI command to manage the power recalibration mode. power recal <none | read | redo> |
|
| v1.3r1 | Resolved: AP reboots Enhanced: SNMP and ARQ New Feature: Command to disable and enable SNMP engine |
|
| v1.2r2 | S: AP/SU: Improved transmit routine to compensate during temperature changes. S: AP: Fixed SU info display S: AP: Fixed entry for su testrflink |
|
| v1.1r1 | Corrects SNMP related AP Reboot issue. Corrects Autoscan switch turn-off in SU when using browser for configuration. | |
| v05042700 FPGA | FPGA Firmware. Reduces spontaneous AP reboot. Cures occasional 1 second hesitancy. | |
| M900S AP & SU |
v2.1r1 | Resolved issues: AP reboots Enhanced: - Rx packets -SNMP and ARQ New Feature: Command to disable and enable SNMP engine |
| v0612400 FPGA | Prevents uploading incorrect firmware between M900S and M915S units | |
| v1.4r1 | Corrects SNMP related AP Reboot issue. Corrects Autoscan switch turn-off in SU when using browser for configuration. | |
| v05033000 FPGA | FPGA Firmware. Reduces spontaneous AP reboot. Cures occasional 1 second hesitancy. | |
| v1.3 | Corrects 14 SU limitation in HTTP interface. Ability to disable local packet filtering. | |
| v1.2a4 Main Image Firmware Patch |
This firmware cures periodic SU disassociation and default opmode function. NOTE: FPGA v04041202 MUST BE INSTALLED PRIOR TO INSTALLING v1.2a4 FIRMWARE. |
|
| v2.0r3 | Resolved issues: - Intermittent power level drop off - Improved transmit routine to compensate during temperature changes - Fixed SU info display - Fixed entry for su testrflink - AP/SU Firmware prevents uploading wrong firmware between M900S and M915S units |
|
| M915S SU only | v2.1r1 Firmware & v0612400 FPGA |
Resolved firmware issues: - ARQ engine fixed NOTE: no changes to FPGA -- original file |
| Access5800 AP & SU |
v1.7 | Provides new command to disable ARP broadcasts. Fixes PPPoE Filter. |
| v1.41 (archived) | v1.41 must be loaded onto radios running v1.3 or lower prior to loading latest firmware v1.6. NOTE: Will not function on Rev. B or newer radios. |
|
| v1.64 | Includes TCP/IP access to SU in opmode SU. NOTE: Will not function on Rev. B or newer radios. |
|
MIB Downloads |
||||||||||||||
Trango provides proprietary Management Information Bases (MIBs) for its products for use with SNMP management programs. To download MIBs, click the link in the Revision column.
|
Beta Utility Downloads |
||||||||||||||||||||||||
To download utility, click the link in the Revision column.
|