TrangoLINK Giga Series
| ● | Unmatched system gain delivers robust link performance with greater distances, higher link reliability and smaller antennas |
| ● | Complete frequency coverage 6-40 GHz for split systems and all outdoor units |
| ● | Multiple Native IP and TDM ports for fiber, STM1, OC3 and GigE supports seamless migration from TDM to packet based traffic |
| ● | Error-free hitless link protection (1+1 Hot Standby built-in) for fail-safe operation |
| ● | Hitless ACM (Adaptive Coding & Modulation) |
| ● | Pre-shipping link configuration to customer specification ensures quick and easy setup |
| ● | Pre-shipping link configuration to customer specification ensures quick and easy setup |
| ● | Complete line of accessories including antennas, combiners, power supplies and installation hardware. |
Feature |
TrangoLINK ApexPlus™ |
TrangoLINK GigaPlus™ |
TrangoLINK GigaPro™ |
| Architecture | All-Outdoor |
Split |
Split |
| Capacity Raw L2 (Mbps Full Duplex) 1518 byte frame | 372.5 Mbps |
372.5 Mbps |
745 Mbps |
| Capacity Raw L2 (Mbps Full Duplex) 9600 byte frame | 375 Mbps |
375 Mbps |
750 Mbps |
| Capacity Raw L1 (Mbps Full Duplex) 64 byte frame | 413 Mbps |
413 Mbps |
823 Mbps |
| GigE Copper | 2 |
4 |
6 |
| GigE Fiber |
1 |
2 |
2 |
| STM-1/OC3 | 2 |
||
| T1/E1 |
1 |
8 |
32 |
| 1+1 Hot Standby | ● |
● |
● |
| 1+1 Hitless Space/Frequency Diversity |
● |
||
| 2+0 Link Aggregation |
● |
Industry Leading System Gain
Trango’s receive sensitivity combined with best in class transmitter power output yields up to 10 dB more system gain than competing products. The result is higher link reliability, longer link distances and smaller antennas. The chart below shows examples of system gain for different frequencies.
Band / Channel Size / Modulation |
TX Power |
RX Sens |
System Gain |
| 6 GHz / 10 MHz / QPSK | 30 dBm |
-92.2 dBm |
122.2 dB |
| 6 GHz / 30 MHz / QAM256 | 24 dBm |
-68.6 dBm |
92.6 dB |
| 18 GHz / 7 MHz / QPSK | 25 dBm |
-93.9 dBm |
118.9 dB |
| 18 GHz / 56 MHz / QAM256 | 19 dBm |
-65.8 dBm |
84.8 dB |
Error-free Hitless Link Reliability
All Giga Series products utilize Adaptive Coding & Modulation (ACM), which automatically changes the modulation during channel degradation events such as rain or signal fading. Each transition to a lower or higher modulation is done without dropping any Ethernet or TDM traffic and transition thresholds can be configured by the operator. When combined with the Quality of Service features of the Giga series, the most critical traffic is unaffected even in severe fading conditions, increasing overall link up-time.
The GigaPro series adds full hitless link protection for 1+1 hot standby, space or frequency diversity, due to the baseband switching technique unique to the GigaPro product.
